SCX24 RTI And Breakover Angle Tool 3D Printer Model
The file 'SCX24 RTI And Breakover Angle Tool 3D Printer Model' is (stl) file type, size is 422.4KB.
The file 'SCX24 RTI And Breakover Angle Tool 3D Printer Model' is (stl) file type, size is 422.4KB.
I saw one of these in a video and thought, "That's cool, I should buy one of those." Then I saw that it was $175.00 on Amazon. I modeled my own. Not as high class, but it gets the job done. Has an RTI ramp, and you can measure your roll over angle (Front to Back, Side to Side).
I used a Bambu Lab X1 Carbon to print it in two separate pieces. The hinges on the top side are round, and so the main plate is not flush with the print bed. This works out okay on my printer because it's very good at producing tiny supports that come off exceptionally easy.
Version 1:
It was built to be 250mm wide (not from handle to hinge) to fit my JLU and JT SCX24's, unfortunately for me, I had to print it at 210mm due to the bed size on the X1 Carbon, it still works, but the RTI values are slightly off.
Enjoy not having to spend $175.00 for this. :)
| SCX24_BreakOverAngleTool_V1_Bottom.stl | 795.5KB | |
| SCX24_BreakOverAngleTool_V1_Top.stl | 150.7KB | |
| SCX24_BreakOverAngleTool_V2_Bottom.stl | 444.9KB | |
| SCX24_BreakOverAngleTool_V2_Top.stl | 152.0KB |
