The file 'SCX24 Bouncer Chassis 3D Printer Model' is (stl) file type, size is 6.7MB.
Since it's been stuck in perpetual development due to moving and life, figured I'd throw the files up for everyone else to use. Will eventually have more versions.
I've printed and test fit all parts, it's good to go for the most part. If you notice anything please comment or message.
Bolt On Bouncer Chassis for SCX24. C10 front and Betty rear links are best. C10 front and rear should work. Betty front has some interference with esc tray.
You'll use the stock skid, battery tray, axles, etc. Just ditch the metal chassis.
HIGHLY SUGGEST using something aside form PLA, these are smalllll parts.
Mirror the chassis side and print to complete.
UPDATE - Added missing screw holes in front of chassis, finished 2 "roof" options, made "hinged hood" to allow for clearance of wires to esc.
UPDATE 2 - Changed ESC tray to allow for more room for links, shortened front for more clearance by servo, adjusted esc cover a little.
| SCX24_Flat_Panel_Bouncer_Chassis_-_Driver_Side.stl | 3.2MB | |
| SCX24_Flat_Panel_Bouncer_Chassis_-_ESC_Cover.stl | 527.0KB | |
| SCX24_Flat_Panel_Bouncer_Chassis_-_ESC_Tray.stl | 1.3MB | |
| SCX24_Flat_Panel_Bouncer_Chassis_-_Passenger_side.stl | 3.2MB | |
| SCX24_Flat_Panel_Bouncer_Chassis_-_Rear_Brace.stl | 364.5KB | |
| SCX24_Flat_Panel_Bouncer_Chassis_-_Roof_Option_1_need_3.stl | 159.5KB | |
| SCX24_Flat_Panel_Bouncer_Chassis_-_Roof_Option_2.stl | 5.8MB | |
| SCX24_Flat_Panel_Bouncer_Chassis_-_Roof_Option_3.stl | 216.9KB |
