SCX10 Tube Rear Bumper (Pretty Much Any Crawler Compatible) 3D Printer Model
The file 'SCX10 Tube Rear Bumper (Pretty Much Any Crawler Compatible) 3D Printer Model' is (stl) file type, size is 833.2KB.
The file 'SCX10 Tube Rear Bumper (Pretty Much Any Crawler Compatible) 3D Printer Model' is (stl) file type, size is 833.2KB.
Hi guys,
Update: I didn't really like the mount setup with the original version so I worked up a new one to go with my bumper mount kit. V3 uses the "Mount_3_Narrow" with long M2.5 screws threaded in from the front and into the mount posts for strength. V2 uses the "Mount_3_Alt_Hole_Pattern" and M2.5x6mm screws threaded in from the front into the mount with additional optional long M2.5 screws in the mount for strength.
Mount kit: https://www.thingiverse.com/thing:4617755
This is a tube bumper for pretty much any rock crawler. I included a version with no mount for the DIYers and the mount for those who want one, and pretty much any combo you might want. Width is 180mm. Fill your boots.
I printed the mount out of PLA and it's dodgy because the tabs aren't strong enough. I added another mount (BMP8_mount) that is more in line with my past stuff. Doing the mount out of TPU generally results in better durability.
Use at your own risk.
Wrench to drive or drive to wrench?
| BMP7.stl | 320.5KB | |
| BMP7_Mount.stl | 78.2KB | |
| BMP7_Mount_w_Holes.stl | 100.5KB | |
| BMP7_No_Mount.stl | 211.1KB | |
| BMP7_V2.stl | 314.0KB | |
| BMP7_V3.stl | 226.5KB | |
| BMP7_w_Holes.stl | 261.5KB | |
| BMP7_w_Plate.stl | 242.4KB | |
| BMP7_w_Plate_w_Holes.stl | 292.8KB | |
| BMP8_mount.stl | 128.0KB | |
| Ch_Bumper_Mount.stl | 74.9KB | |
| TRX4_Bumper_Mount.stl | 157.3KB |
