I wanted more scale details for my SCX10 III JLU and JT, so I started modeling some for my printer. In the photos, the all black one has the exact same parts 3D printed on it as the black/orange one. The only difference is the orange one has metal wheels and no awning. You can see how much of a difference the filament color makes in how toyish the vehicle looks, I just wanted make sure it's clear what parts are 3d printed.
Here is a list of all parts used, and the size I print them at for my SCX10 III JLU/JT Wrangler/Gladiator rock crawlers. For the sizing to work you need to ensure that all axis have uniform scaling enabled.
NOTE:
If you're unsure about which axis to resize to scale correctly for a 1/10th, or if I made a mistake in sizing, send me a message.
Included Parts:
ION Alloy 141 replica 1.9 wheel: 60mm wide (face, center ring, center cap, back ring included, bolt holes fit M3)
FUEL Sledge replica 1.9 wheel: 60mm wide (face, center ring, center cap, back ring included, bolt holes fit M3)
FireExtinguisher and Mount: 33mm tall
Gladiator Front Hood Hinges: 15mm long
Gladiator Bed/Tailgate MOLLE panels: 74mm long
Gladiator Rotopax Mount: 19.73mm tall
IGLOO Cooler: 50mm wide
Jeep 7 Slot Grille: 38mm tall
Jeep Cupholders: 10mm wide
Jeep Dash Vents: 10.3mm diameter
Jeep Door Hinge: 15mm long
Jeep Front Door Armor: 100mm long
Jeep Headlight Armor/Cover: 20.5mm diameter
Jeep Hood Light Bar: 88mm wide
Jeep Hood Window Bumper: 14mm long
Jeep Rear Bumper: 190mm wide
Jeep Rear Door Armor: 75mm long
Jeep Rearview Mirror: 23mm wide
Jeep Side Fender Mesh Grille: 20mm long
Jeep Snorkel Side Mounted: 33mm tall (with it laying on its back)
Jeep Stickshifts: 17mm tall
Jeep Stubby Antenna: 9mm wide
Jeep Turn Signal Lens: 27.743mm long
Jetboil: 10mm wide
MaxTrax: 114mm long
Roofnest Awning: 180mm long
Roofnest Awning Bracket: 9mm wide
Roofnest Awning Bracket (clips to roof rack model): 11.5mm wide
Roofnest Rooftop Tent: 154mm long
Rotopax 2Gallon Container: 43.18mm tall
Rotopax 2Gallon Mount: 29.208mm tall
Rotopax 2Gallon Mount and Container: 43.18mm tall
Wrangler Hood Hinges: 15mm long
Wrangler Rack Front Section: 145mm wide
Wrangler Rack Rear Section: 147 wide
Wrangler Rear Tailgate Hinges: 35mm long
Wrangler Rear Window Hinges: 15mm long
Wrangler Rear Window MOLLE Panel: 39mm tall
Wrangler Rock Sliders/Rails: 165mm long
Wrangler Side Ladder: 33mm wide
| FireExtinguisher_and_mount.stl | 126.6KB | |
| GladiatorBedTailgateMolle.stl | 149.7KB | |
| GladiatorFrontHoodHinges.stl | 47.0KB | |
| Gladiator_RotopaxMount.stl | 114.9KB | |
| Igloo_Cooler.stl | 153.2KB | |
| JeepHoodHinges.stl | 78.0KB | |
| JeepRearTailgateHinges.stl | 74.7KB | |
| JeepRearWindowHatch.stl | 61.6KB | |
| Jeep_7Slot_grille.stl | 1.4MB | |
| Jeep_DashVent.stl | 20.2KB | |
| Jeep_DoorHinge.stl | 242.0KB | |
| Jeep_E_Brake.stl | 22.5KB | |
| Jeep_FrontDoorArmor.stl | 732.2KB | |
| Jeep_HeadlightArmorCover.stl | 80.7KB | |
| Jeep_HoodLightBar.stl | 66.8KB | |
| Jeep_HoodWindowBumper.stl | 175.2KB | |
| Jeep_RearBumper.stl | 452.0KB | |
| Jeep_RearDoorArmor.stl | 417.5KB | |
| Jeep_RearViewMirror.stl | 45.4KB | |
| Jeep_SideFender_MeshGrille.stl | 62.2KB | |
| Jeep_Snorkel_SideMount.stl | 280.6KB | |
| Jeep_StickShifts.stl | 224.7KB | |
| Jeep_StubbyAntenna.stl | 34.7KB | |
| Jeep_TurnSignalLense.stl | 10.0KB | |
| JetBoil.stl | 129.6KB | |
| MaxTrax.stl | 1.1MB | |
| RC_CupHolders.stl | 17.9KB | |
| RC_Wheel_FUEL_Sledge_60mm.stl | 4.1MB | |
| RC_Wheel_IonAlloy141_60mm.stl | 4.4MB | |
| Roofnest_Awning.stl | 108.3KB | |
| RoofNest_AwningBracket.stl | 14.9KB | |
| Roofnest_AwningBracket_NoDrill.stl | 33.5KB | |
| RoofNest_RTT.stl | 210.8KB | |
| Rotopax_2gal.stl | 138.2KB | |
| Rotopax_2Gal_Mount.stl | 14.7KB | |
| Wrangler_Rack_Front.stl | 42.9KB | |
| Wrangler_Rack_Rear.stl | 55.4KB | |
| Wrangler_RearWindowMollePanel.stl | 35.6KB | |
| Wrangler_RockSliders_BothSides.stl | 884.1KB | |
| Wrangler_Side_Ladder.stl | 21.9KB |
