Scuttling Spirit Of The Machine God 3D Printer Model
The file 'Scuttling Spirit Of The Machine God 3D Printer Model' is (stl) file type, size is 20.5MB.
The file 'Scuttling Spirit Of The Machine God 3D Printer Model' is (stl) file type, size is 20.5MB.
[Insert incredibly witty and emotionally moving description]
This is a kit to modify the Flying Spirit of the Machine God into a walker by borrowing parts from the Sand Walker 28mm.
Instead of links for the individual Sand Walker 28mm parts and telling you to print them at 90%, I added them here at the correct size for this model.
Print:
4x Leg_half_style1_redux_smaller.stl
4x Leg_half_style1_redux_smaller.stl (mirrored in your slicer)
1x all the other parts in this kit
1x Servo Arm, Sand Walker
1x Dendrite1.stl
1x Dendrite2.stl
1x FuselagePlateSmall.stl
1x FuselagePlateLarge.stl
1x FuselageUpper.stl
4x ThrusterOuter_x4.stl
4x ThrusterInner_x4.stl
If you feel the overwhelming inclination to show your gratitude, tips are always greatly appreciated.
| FuselageLowerWalker.stl | 8.9MB | |
| Leg_half_style1_redux_smaller.stl | 2.2MB | |
| leg_joint_bottom_smaller.stl | 1.4MB | |
| leg_joint_mid_smaller.stl | 491.8KB | |
| neutron_laser_smaller.stl | 16.5MB | |
| OpticsProbe.stl | 2.0MB | |
| StubberWalker.stl | 770.6KB | |
| WalkerMountUpper.stl | 1.0MB | |
| WeaponMainMountWalker.stl | 43.6KB | |
| WeaponStubberMountWalker.stl | 39.7KB | |
| weapon_base.stl | 4.4MB | |
| weapon_cap.stl | 15.5MB |
