The file 'Sculptr Delta MK1 3D Printer Model' is (stl,dxf,zip,ini) file type, size is 3.0MB.
The Sculptr Delta MK1 is a low-cost delta style 3D printer created for beginners and makers.
Join the Sculptr group on Thingiverse if you have any question or suggestion about our printers : http://www.thingiverse.com/groups/sculptr
Website : http://www.sculptr.fr
Youtube : https://www.youtube.com/c/3DPrintingTips
Facebook : https://www.facebook.com/printingtips3d/
Twitter : https://twitter.com/printingtips3d
Instagram : 3dprintingtips
Mechanical parts :
Extrusion :
Heated bed (optional but recommanded) :
Electronics :
Screws & Nuts :
Printed parts :
Cutted parts :
For any question or suggestion : contact[at]sculptr.fr
See it in action : https://www.youtube.com/watch?v=yEZaucU6Y_E
The future of the Sculptr project : https://www.youtube.com/watch?v=eGv1PW3HHeM
| 150mm_rod.stl | 233.4KB | |
| arduino_support.stl | 3.0MB | |
| bed.dxf | 97.3KB | |
| bed_support_part1.stl | 42.8KB | |
| bed_support_part2.stl | 27.1KB | |
| bottom_frame.stl | 3.0MB | |
| bottom_frame_Z_axis.stl | 3.3MB | |
| carriage.stl | 1.7MB | |
| e3d_blocker.stl | 38.2KB | |
| e3d_top.stl | 607.4KB | |
| endstops_tube_fixing.stl | 418.2KB | |
| extruder_arm.stl | 141.1KB | |
| extruder_body.stl | 376.9KB | |
| extruder_support1.stl | 44.4KB | |
| extruder_support2.stl | 58.3KB | |
| foot.stl | 176.5KB | |
| GT2_belt_carriage.stl | 16.3KB | |
| hotend_fans.stl | 516.2KB | |
| joint.stl | 53.0KB | |
| LCD_front.stl | 1.3MB | |
| LCD_front_rods_support.stl | 316.5KB | |
| LCD_front_support.stl | 626.9KB | |
| LCD_front_with_reset.stl | 2.0MB | |
| Marlin.zip | 1.1MB | |
| platform.stl | 2.1MB | |
| SculptrDelta.ini | 10.4KB | |
| switch_panel.stl | 57.1KB | |
| top_frame.stl | 138.5KB | |
| top_frame_spool_holder.stl | 1.7MB | |
| top_frame_Z_axis.stl | 173.9KB |
