This spool holder has been modified to fit the spools for the Sculpto 3D printer.
UPDATE: A new spool size was introduced by the end of 2019. Only the 0,5 kg spool will fit this holder. The 1 kg spool will NOT. You may want the thing I remixed this from instead; "Freestanding Filament Spool Holder" by tselling
Print the Filament Holder and any axis.
If you are printing on a Sculpto that has issues printing near center use the OFF CENTER file. (OFF CENTER diameter: 165,08 mm vs. normal diameter: 146,60 mm)
There are three different axis:
With centering groves for 500 g spools
With centering groves for 1000 g spools
Without centering groves
I was asked to also make a thicker version, the files for this have been added and prefixed with 90 mm.
Please note that the axis for the 'normal' (80 mm) version will not fit the 90 mm. The axis from the 90 mm will however fit into the 'normal' version but will be 10 mm longer than needed.
The holder for the 90 mm version has been rotated 90°, with the added width this means Sculpto owners need not fear the center with this version.
| 90mm_Axis_centering_1000g.stl | 158.0KB | |
| 90mm_Axis_centering_500g.stl | 157.6KB | |
| 90mm_Axis_no_centering_groves.stl | 56.6KB | |
| 90mm_Filament_Holder.stl | 455.4KB | |
| Axis_centering_1000g.stl | 164.8KB | |
| Axis_centering_500g.stl | 157.4KB | |
| Axis_no_centering_groves.stl | 56.8KB | |
| Filament_Holder.stl | 489.0KB | |
| Filament_Holder_OFF_CENTER.stl | 489.5KB |
