This is a replacement strap clip for scubapro microframe mask. There are two files: the strap clip and the guard (in case the original is broken). The guard needs 2x M2.5x8 screws. If you use the guard drill two 2.5mm holes. You can use one guard as a guide. The strap clip should be printed oriented as is. The lever is printed in place. Use support and remove it.
Print from PETG or other water inert material.
From my testing the clip is stronger than the original.
| scubapromicroframe_cover_2_v1.stl | 69.8KB | |
| scubapro_microframe_clip_v3.stl | 489.2KB |
