Screws Storage Modular Box 3D Printer Model
The file 'Screws Storage Modular Box 3D Printer Model' is (3mf,stl) file type, size is 1.3MB.
The file 'Screws Storage Modular Box 3D Printer Model' is (3mf,stl) file type, size is 1.3MB.
Thanks CNeeper for the initial design!
I liked the simplicity and modular way in this storage system.
In my remix, I prolonged the drawers and shells to almost maximum size printable on Ender 3 and to allow more storage using maximum space on shelf.
In this remix, the shell of drawer is 209.5 mm and drawer includes the handle and additional divider slots.
With labels, I tried to print thin labels, but due to small size of numbers (embossed or cut through the label) it was difficult to print something usable especially for small drawer. Therefore, I decided to label manually on paper (can also be printed out and cut off).
Be patient, the print takes time, e.g. small drawer >6 hours and small shell >10 hours.
Update 6th March 2022: I have added a small drawer option with 4 dividers (each 4 cm apart) for more small parts storage in one drawer (Drawer-Small with handle 4 dividers).
| Drawer-Large_with_handle.3mf | 269.5KB | |
| Drawer-Medium_with_handle.3mf | 157.5KB | |
| Drawer-Small_with_handle.3mf | 151.0KB | |
| Drawer-Small_with_handle_4_dividers.3mf | 160.4KB | |
| DrawerDivider-Large.3mf | 21.2KB | |
| DrawerDivider-Medium.3mf | 18.9KB | |
| DrawerDivider-Small.3mf | 52.7KB | |
| InterlockingModule-Large.3mf | 32.7KB | |
| InterlockingModule-Medium.3mf | 50.5KB | |
| InterlockingModule-Small.3mf | 28.2KB | |
| LockingClip-long.3mf | 118.3KB | |
| LockingClip-medium.stl | 415.3KB | |
| LockingClip-short.stl | 373.1KB |
