Screen Printing Press 3D Printer Model
The file 'Screen Printing Press 3D Printer Model' is (stl) file type, size is 2.0MB.
The file 'Screen Printing Press 3D Printer Model' is (stl) file type, size is 2.0MB.
This is a very robust one color screen printing press. It's still a work in progress, but it works flawlessly. Please bear with me while I compile a BOM, and instructions on how to build this press.
Bill of Materials:
• 3090 Aluminum Extrusion (380 mm in length)
https://us.misumi-ec.com/vona2/detail/110302687670/?Inch=0&CategorySpec=00000042730%3A%3A30x90
•M6 Insertion Nuts for 30mm extrusion
https://us.misumi-ec.com/vona2/detail/110302251050/?HissuCode=HNTT6-6&PNSearch=HNTT6-6&searchFlow=results2products&Keyword=HNTT6-6
•3/8" anodized aluminum rod (or any 3/8" rod with good tolerance). I bought a 6' length of it from McMaster Carr, but you only need about 115mm in length. If you have a hard time sourcing it, send me a message.
https://www.mcmaster.com/#aluminum-hollow-rods/=1848phz
• 3/8" x 1 1/2" hex bolts (qty. 2)
• 3/8" x 1" hex bolts (qty. 2)
• 3/8" nuts (qty. 4)
• M6 x 12mm flat head screws (qty. 6)
• M6 x 16mm flat head screws (qty. 2)
• 1/4" x 1 3/4" flat head screws (qty. 4)
• 1/4" brass threaded insert (for the platen)
• 3/4" MDF, or laminated handi-panel for the platen (cut to the exact size of your screen)
| ExtrusionCap.stl | 37.0KB | |
| JOES_Arm_V1.stl | 936.7KB | |
| JOES_Chassis_V1.stl | 1.8MB | |
| JOES_Clamp_SPACE_V1.stl | 861.0KB | |
| JOES_Clamp_V2.stl | 1.6MB | |
| JOES_ExtrusionCap_V1.stl | 606.5KB | |
| JOES_Knob_V1.stl | 1.1MB | |
| JOES_PlatenBrace_V1.stl | 494.0KB |
