I designed this screen case for a CLAA154WB05AN screen (from an old laptop).
The specs of the screen are available here: https://www.panelook.com/CLAA154WB05AN_CPT_15.4_LCM_overview_2750.html
Thanks to ronan.tolla for his great stand design which I used and adapted in minor places. You can find his instructables here: https://www.instructables.com/3D-Printed-Mini-5-Inch-Monitor/
3D PRINTING SETTINGS
Only tested with Creality CR-20 Pro.
20% infill
210 nozzle
60 bed
Glued together
Designed a screw for the case holder and the mount.
The design is cut in pieces to fit small printers.
You will need to purchase a LCD controller online and paste the components to the back of the screen accordingly.
Warning: There is very low tolerance on the pieces, you will need to make sure your bed is levelled perfectly.
| case_left_bottom.stl | 8.4KB | |
| case_left_top.stl | 4.9KB | |
| case_right_bottom.stl | 8.6KB | |
| case_right_top.stl | 4.9KB | |
| CLAA154WB05AN_screw.stl | 11.4KB | |
| CLAA154WB05AN_screw_cap.stl | 13.2KB | |
| horizontal_holder_1.stl | 684.0B | |
| horizontal_holder_2.stl | 684.0B | |
| lid_left_bottom.stl | 5.2KB | |
| lid_left_top.stl | 22.5KB | |
| lid_right_bottom.stl | 13.6KB | |
| lid_right_top.stl | 30.8KB | |
| stand_base.stl | 8.1KB | |
| stand_left.stl | 2.8KB | |
| stand_right.stl | 2.8KB | |
| stand_top.stl | 31.4KB | |
| vertical_holder.stl | 684.0B |
