ScorpionTK-M4 Airsoft Blaster Conversion 3D Printer Model
The file 'ScorpionTK-M4 Airsoft Blaster Conversion 3D Printer Model' is (stl,pdf) file type, size is 3.2MB.
The file 'ScorpionTK-M4 Airsoft Blaster Conversion 3D Printer Model' is (stl,pdf) file type, size is 3.2MB.
PDF of all instructions included in download
Design goals for the ScorpionTK-M4
-A conversion kit that will simulate the ScorpionTK blaster from Star Wars: The Old Republic on an M4 airsoft platform
-It should fit any commercially available M4
--Fit tested on the following rifles:
---Lancer Tactical M4
---Valken ASL
---JG M4 CQB Pistol "STRYKER"
-Make it work with front-wired M4s by having a battery compartment.
The blaster body is based on this model:
-Scorpion TK Blaster Rifle - SWTOR - Cosplay by xol_gedyc
-https://www.thingiverse.com/thing:3214410
| rail_segment.stl | 9.3KB | |
| ScorpionTK-M4_-_1_MUZZLE.stl | 223.8KB | |
| ScorpionTK-M4_-_2_MUZZLE.stl | 337.1KB | |
| ScorpionTK-M4_-_alignment_rods.stl | 73.9KB | |
| ScorpionTK-M4_-_body_FRONT.stl | 266.2KB | |
| ScorpionTK-M4_-_body_MIDDLE_10.stl | 143.3KB | |
| ScorpionTK-M4_-_body_MIDDLE_12.stl | 143.3KB | |
| ScorpionTK-M4_-_body_MIDDLE_8_.stl | 143.3KB | |
| ScorpionTK-M4_-_body_RECEIVER.stl | 420.3KB | |
| ScorpionTK-M4_-_FULL_SIZE_10.stl | 850.3KB | |
| ScorpionTK-M4_-_FULL_SIZE_12.stl | 821.9KB | |
| ScorpionTK-M4_-_FULL_SIZE_8.stl | 842.8KB | |
| ScorpionTK-M4_-_hengstler_body.stl | 57.9KB | |
| ScorpionTK-M4_-_hengstler_probe.stl | 118.5KB | |
| ScorpionTK-M4_-_rail_guide.stl | 105.1KB | |
| ScorpionTK-M4_instructions.pdf | 1.9MB | |
| short_barrel_nut_v2.stl | 274.4KB |
