School (pt.1 Of 2) – Main Building (z-scale) 3D Printer Model
The file 'School (pt.1 Of 2) – Main Building (z-scale) 3D Printer Model' is (stl) file type, size is 90.25 KB.
The file 'School (pt.1 Of 2) – Main Building (z-scale) 3D Printer Model' is (stl) file type, size is 90.25 KB.
School (pt.1 of 2) - Main building (z-scale)
I had the idea to design a classic school building and a later added modern added annex for science classes. Here is the 1st part including the base plates for the school yard.
The trees are already available on Thingiverse as „Set of trees 2“ (Thing: 5321269)
Assembling:
I use 0,5mm transparent foil, clear or slightly opaque, availably at stationary shops.
Alternatively you can "upcycle" plastic packaging material from your groceries.
Paint to your taste and assemble as seen in the pictures.
Printing:
Print the wall elements flat on the printing bed to allow the details printed without/few supports, base plate and roof with the lower side in the printing bed.
Mirror the elements in your printer software in case you need it in another orientation.
For n-scale use a scaling factor of 1,38 in your printer software.
| t112a_Base_plate.stl |
| t112b_Central_part_front_wall.stl |
| t112c_Central_part_rear_wall.stl |
| t112d_Central_part_roof.stl |
| t112e_Left_part_front_wall.stl |
| t112f_Left_part_rear_wall.stl |
| t112g_Left_part_side_wall.stl |
| t112h_Left_part_roof.stl |
| t112i_Right_part_front_wall.stl |
| t112j_Right_part_rear_wall.stl |
| t112k_Right_part_side_wall.stl |
| t112l_Right_part_roof.stl |
| t112m_Base_plate_school_yard_1.stl |
| t112n_Base_plate_school_yard_2.stl |
| t112o_Base_plate_school_yard_3.stl |
