Scandinavian Birdhouse 3D Printer Model
The file 'Scandinavian Birdhouse 3D Printer Model' is (stl) file type, size is 277.58 KB.
The file 'Scandinavian Birdhouse 3D Printer Model' is (stl) file type, size is 277.58 KB.
A nice birdhouse in Scandinavian style with a feeder on the right side. I haven't printed it yet, so no tips about print settings so far. If you have any tips, let me know in the comments.
Everything needs to be printed once, except:
Corner x4
Window x2
Roof-frame x2
Pin x47
Use the small pins to attach the parts with glue. Attach the sidewalls to the floor first, followed by the frontwall and backwall. The frontwall and backwall needs to be complete first. Then the roof on top of the walls.
Falu red hex #801818 RGB 128-24-24
Gray green hex #576951 RGB 87-105-81
Dark gray hex #505050 RGB 80-80-80
White hex #FFFFFF RGB 255-255-255
| backwall-bottom.stl |
| backwall-top.stl |
| birdhouse-complete.stl |
| birdopening-frame.stl |
| chimney.stl |
| corner.stl |
| door-frame.stl |
| door.stl |
| feeder1.stl |
| feeder2.stl |
| feeder3.stl |
| floor.stl |
| frontwall-bottom.stl |
| frontwall-top.stl |
| pin.stl |
| roof-frame.stl |
| roof1.stl |
| roof2.stl |
| sidewall-left.stl |
| sidewall-right.stl |
| tinyhouse-body.stl |
| tinyhouse-roof.stl |
| window-frame.stl |
