Scale Of Inscryption 3D Printer Model
The file 'Scale Of Inscryption 3D Printer Model' is (stl) file type, size is 341.0MB.
The file 'Scale Of Inscryption 3D Printer Model' is (stl) file type, size is 341.0MB.
The scale of the game Inscryption as an actual real world scale that works.
In the game the scale shows the player the actual game state in a twisted sometimes brutal card game. Teeth are put on the scale for points earned, when the scale goes all the way to one side a winner is determined and a loser terminated.
Keep in mind that physics don't quite work like in the game. (When there are lots of teeth on one side a single teeth can not change the scale one increment. Furthermore the teeth would need to be really heavy to change any increment.) There are however extra controls at the back that lets you change the scale to any increment. Theoretically you could also use this scale to weight real life things if you use it along with scale weights.
The default scale is split up in a way so it can be printed without any support. Connector bits can be put in slots to connect the pieces without any glue.
Need teeths? - You find teeth here https://www.thingiverse.com/thing:5180411
| 00_BottomCase_Optional.stl | 978.2KB | |
| 01_Feet.stl | 15.5MB | |
| 02_Pillar-Start.stl | 10.1MB | |
| 03_Pillar-Middle.stl | 14.8MB | |
| 04_Pillar-Top.stl | 4.2MB | |
| 05_Display.stl | 9.8MB | |
| 06_EyeFront.stl | 2.9MB | |
| 07_EyeLid-Lower.stl | 423.4KB | |
| 08_EyeLid-Upper.stl | 422.9KB | |
| 09_Eyeball.stl | 400.2KB | |
| 10_Eye-Backplate.stl | 70.3KB | |
| 11_DriveGear.stl | 904.3KB | |
| 12_Gear.stl | 79.4KB | |
| 13_ArrowGear.stl | 7.0MB | |
| 14_ArrowArms.stl | 1.4MB | |
| 15_BackDisplay_Optional.stl | 2.5MB | |
| 16_BackPinArrow.stl | 830.1KB | |
| 17_Left_Arm-Main.stl | 20.8MB | |
| 17_Right_Arm-Main.stl | 20.8MB | |
| 18_Left_Arm-End.stl | 4.2MB | |
| 18_Right_Arm-End.stl | 4.2MB | |
| 19_Left_Arm-HandBone.stl | 1.2MB | |
| 19_Right_Arm-HandBone.stl | 1.2MB | |
| 20_Claws-X2.stl | 19.9MB | |
| 21_Chains-Shorter-X2.stl | 20.1MB | |
| 22_Chains-X4.stl | 20.1MB | |
| 23_HookPlatform-X6.stl | 1.9MB | |
| 24_Left_Platform.stl | 11.0MB | |
| 25_Right_Platform.stl | 20.8MB | |
| Connector.stl | 46.2KB | |
| Extra--000-Connector_E_Easier.stl | 46.2KB | |
| Extra--000-Connector_E_Longer.stl | 46.2KB | |
| Extra--000-Connector_E_MoreTolerance.stl | 46.2KB | |
| Extra--01_Feet_E_Split-Back.stl | 7.9MB | |
| Extra--01_Feet_E_Split-Front.stl | 8.0MB | |
| Extra--02-04_Pillar_E_Full.stl | 25.2MB | |
| Extra--03_Pillar-Start_E_Shorter.stl | 10.1MB | |
| Extra--05_Display_E_Standing.stl | 9.1MB | |
| Extra--12_Gear_E_EvenMoreTolerance.stl | 73.9KB | |
| Extra--12_Gear_E_LessTolerance.stl | 79.4KB | |
| Extra--12_Gear_E_MoreTolerance.stl | 73.9KB | |
| Extra--17-19_Left_Arm_E_Full.stl | 28.8MB | |
| Extra--17-19_Right_Arm_E_Full.stl | 28.8MB | |
| Extra--17_Left_Arm-Main_E_Shorter.stl | 20.8MB | |
| Extra--20_Claws-X2_E_Floating.stl | 4.0MB | |
| Extra--20_Claws-X2_E_WithoutExtraPlatform.stl | 19.9MB | |
| Extra--22_Chains-X4_E_2MoreRings.stl | 24.0MB | |
| Extra--22_Chains-X4_E_AlternativeOrientation.stl | 24.0MB | |
| Extra--22_ChainsShorter-X2_E_2MoreRings.stl | 24.0MB | |
| Extra--22_ChainsShorter-X2_E_AlternativeOrientation.stl | 24.0MB | |
| Extra--23_HookPlatform-X6_E_WIthoutExtraPlatform.stl | 1.9MB | |
| Extra--24_Left_Platform_E_Full.stl | 20.3MB | |
| Extra--25_Right_Platform_E_Full.stl | 23.5MB |
