The file 'Scale Kaymar Rear Bumper And Body Bracket For 1:10 Axial SCX10 Land Cruiser FJ80 Hardbody 3D Printer Model' is (STL) file type, size is 363.2KB.
Work in progress!
Directly modeled the Kaymar bumper on my '91 Land Cruiser and adapted it to an SCX10 version 1 with the 313mm ABS hardbody.
It's made so that the swingouts can function if you use a very long 3mm bolt, or you can use several bolts to secure the swingarms so they're very secure.
Should fit typical 1.55" wheels on the tire carrier, although I mocked it up with the FZJ80 replica wheels of my own design. The jerry can carrier fits Ossum's jerry can.
The light holes should press-fit standard size LEDs (both 3mm and 5mm).
The body bracket press-fits into the ABS body, which is then longitudinally constrained by the tire carriers. Solid!
When printing the jerry can carrier. put it back-down and use lines type infill or the infill will get stuck.
Still tinkering around with offsets, so the tire doesn't fully bolt through the body hole, etc. Will keep updating as I finish my builds (both full-scale and tenth!)
| Kaymar_KY80_Scale.STL | 264.3KB | |
| Kaymar_left_swingout.STL | 337.0KB | |
| Kaymar_right_swingout.STL | 572.0KB |
