This is the heavy equipment trailer i made for my Tamiya Tundra w/ Dropped Bed.
It is more like 1/12 scale then true 1/10, since the Tamiya is smaller than 1/10
STEP and F3D files now available for you to mod the parts yourself
June 21 2019 Bed_Rear_25mm_FW has the wheels 25mm forward, for better balance when using the straight neck. (Less weight on your hitch)
June 26 2019 Added side rails, glue front-back parts together then drill 2.5mm diameter by 4mm deep holes in the bed and use M3x10 screws to fix it.
July 2019 I made some printable dually wheels, needs (1x) M4x35 bolt+nut and (2x) 4x13x5 bearings per wheel. Also print the new Suspension_Swing_Arm_v3.stl to be able to use these wheels. Some light sanding might be required as the tolerances are tight.
Goose Neck Hitch is made for a Traxxas 1942 rod-end, using (1) of the (4) balls with threads in the package (other balls have a hole instead, will not work). Designed to work with my Tamiya Tundra Dropped Bed, which depending on your model might be higher/lower than mine so please measure carefully before printing to make sure it will fit your model.
Comments and suggestions welcome, and you can remix everything to your heart's desire, as long as you publish your work here too.
Goes well with my other designs :
Tamiya Tundra Dropped Bed : https://www.thingiverse.com/thing:2990191
RC Bulldozer : https://www.thingiverse.com/thing:3654785
Scale Chain Binder : https://www.thingiverse.com/thing:3683701
| Bed_Front_v2.stl | 148.7KB | |
| Bed_Ramp_v4.stl | 116.5KB | |
| Bed_Rear_25mm_FW_v1.stl | 151.1KB | |
| Bed_Rear_v2.stl | 132.7KB | |
| Dually_Spacer_v1.stl | 30.0KB | |
| Dually_Tire_v1.stl | 481.3KB | |
| Dually_Wheel_v1.stl | 579.9KB | |
| Equipment_Trailer_v108.f3d | 380.7KB | |
| Equipment_Trailer_v108.step | 1.4MB | |
| Front_Vertical_v3.stl | 65.3KB | |
| Front_Wood_Planks_v1.stl | 813.6KB | |
| Goose_Neck_v3.stl | 42.7KB | |
| Hitch_Plate_v2.stl | 44.6KB | |
| Jack_Base_v5.stl | 68.9KB | |
| Jack_Foot_v3.stl | 30.0KB | |
| Jack_Handle_v1.stl | 49.3KB | |
| Jack_Rod_v3.stl | 63.4KB | |
| Left_Front_Rail_v1.stl | 17.6KB | |
| Left_Ramp_Lock_v1.stl | 24.7KB | |
| Left_Rear_Rail_v1.stl | 17.8KB | |
| Ramps_v5.stl | 43.1KB | |
| Rear_Ramp_Grill_v1.stl | 24.1KB | |
| Rear_Wood_Planks_v1.stl | 810.4KB | |
| Right_Front_Rail_v1.stl | 17.6KB | |
| Right_Ramp_Lock_v1.stl | 24.7KB | |
| Right_Rear_Rail_v1.stl | 17.8KB | |
| Straight_Neck_v1_3mmHOLE.stl | 60.8KB | |
| Straight_Neck_v1_4mmHOLE.stl | 58.5KB | |
| Straight_Neck_v1_6mmRING.stl | 137.0KB | |
| Straight_Neck_v1_BLANK.stl | 53.0KB | |
| Suspension_Swing_Arm_v2.stl | 213.7KB | |
| Suspension_Swing_Arm_v3.stl | 93.4KB | |
| Wheel_Bearing_Spacer_5mm.stl | 52.5KB |
