Scalable CoreXY V2 Solid Extruder Feeder For Mounting To 2020 (1.75mm Filament) 3D Printer Model
The file 'Scalable CoreXY V2 Solid Extruder Feeder For Mounting To 2020 (1.75mm Filament) 3D Printer Model' is (stl) file type, size is 549.1KB.
The file 'Scalable CoreXY V2 Solid Extruder Feeder For Mounting To 2020 (1.75mm Filament) 3D Printer Model' is (stl) file type, size is 549.1KB.
This is the extruder I built for Scalable CoreXY v2: http://www.thingiverse.com/thing:1829772
I printed the handle using PETG and the body is printed in natural PLA. It is slightly wider than NEMA 17 because I wanted to leave the design open to possibility of changing the 2020 mount direction in the future if necessary.
It uses the same 11mm gear, bearing, and spring from MK7/8 that came with HICTOP printer. Four mounting to NEMA17 motor, it uses 3x m3x5mm, and one m3x25mm. One M4x16mm bolt and nut (inch equivalent I had lying around) is used to fix the bearing to the handle.
NOTE: for 1.75mm Filament
| Extruder_Body.stl | 1.2MB | |
| Handle.stl | 619.2KB |
