Sayha – X FPV Quadcopter 4″ 5″ 6″ 3D Printer Model
The file 'Sayha – X FPV Quadcopter 4″ 5″ 6″ 3D Printer Model' is (stl) file type, size is 3.0MB.
The file 'Sayha – X FPV Quadcopter 4″ 5″ 6″ 3D Printer Model' is (stl) file type, size is 3.0MB.
UPDATE February 05, 2017
Minor fixes in the STL's.
UPDATE November 12, 2016
All frames have been update with improved propeller clearances. (5mm Increase).
Enjoy!
https://www.youtube.com/watch?v=zlCR2uV0GjE (Video from deDrones) Thanks guys!
https://www.youtube.com/watch?v=mpj4sKzhRf4 (Drop Test!)
Sayha - X FPV Race Frame
Quadcopter frame based on the Impulse RC Alien and Lumenier QAV-R with center X removable arms. Its available in various sizes supporting 4", 5" and 6" propellers. Its light and super stiff if printed in ABS 100% infill.
Included are all the .STL files for all the models. The frame is quite light and stiff. I threw the frame over and over against a wall and from a 5th floor balcony and it survived perfectly.
If you end up building one.. let me know your feedback!
Cheers!
| S4_A_All.stl | 754.4KB | |
| S4_A_BackLeft.stl | 185.2KB | |
| S4_A_BackRight.stl | 192.1KB | |
| S4_A_FrontLEft.stl | 192.1KB | |
| S4_A_FrontRight.stl | 185.2KB | |
| S4_B_Plate.stl | 5.1MB | |
| S4_B_PlateLock.stl | 435.3KB | |
| S4_T_Plate.stl | 2.8MB | |
| S4_T_Plate_XT60.stl | 91.8KB | |
| S5_A_All.stl | 732.1KB | |
| S5_A_BackLeft.stl | 186.6KB | |
| S5_A_BackRight.stl | 179.6KB | |
| S5_A_FrontLeft.stl | 179.6KB | |
| S5_A_FrontRight.stl | 186.6KB | |
| S5_B_Plate.stl | 935.3KB | |
| S5_B_PlateLock.stl | 453.4KB | |
| S5_T_Plate.stl | 2.8MB | |
| S5_T_Plate_XT60.stl | 91.8KB | |
| S6_A_All.stl | 749.7KB | |
| S6_A_BackLeft.stl | 187.5KB | |
| S6_A_BackRight.stl | 187.5KB | |
| S6_A_FrontLeft.stl | 187.5KB | |
| S6_A_FrontRight.stl | 187.5KB | |
| S6_B_Plate.stl | 5.5MB | |
| S6_B_PlateLock.stl | 2.9MB | |
| S6_T_Plate.stl | 2.8MB | |
| S6_T_Plate_XT60.stl | 508.2KB |
