Save The Whales (Kinetic Whales) 3D Printer Model
The file 'Save The Whales (Kinetic Whales) 3D Printer Model' is (stl) file type, size is 7.6MB.
The file 'Save The Whales (Kinetic Whales) 3D Printer Model' is (stl) file type, size is 7.6MB.
[Kinetic Whales]
Printable kinetic 3D whales.
Simple assembly is required.
Assemble instruction is in my youtube channel
https://youtu.be/XO6ccPXwV70
Use a raw 1.75mm filament while assemble some parts.
May need a glue and sandpaper while assemble the parts. It depends on a 3d-printer's condition.
The object tested by FDM 3d printer with PLA and ABS filament.
[Printing Details]
Layer height:
0.10mm (Crank_axle, Support_Babywhale, Support_body, support_head, Support_tail, Wheel.stl)
0.15mm (BabyWhale, Head_jaw, Body_01~03, Tail, Left_flipper, Right_flipper, Flukes, Pins.stl)
0.18mm (Base, Cover, SavetheWhales_tag.stl)
Shell count: 3
Fill density: 15~20%
Time to do: about 1300 - 1400 minutes
Technology: FDM
Material: PLA or ABS
Dimensions: 200mm x 130mm x 105mm
Material Quantity: about 160g
| BabyWhale.stl | 383.9KB | |
| Base.stl | 1.0MB | |
| Body_01.stl | 3.7MB | |
| Body_02.stl | 3.4MB | |
| Body_03.stl | 1.6MB | |
| Cover.stl | 1.1MB | |
| Crank_axle.stl | 4.1MB | |
| Flukes.stl | 792.3KB | |
| Head_Jaw.stl | 2.9MB | |
| Left_flipper.stl | 1.5MB | |
| Pins.stl | 1.0MB | |
| Right_flipper.stl | 1.5MB | |
| SavetheWhales_tag.stl | 2.6MB | |
| Support_babywhale.stl | 979.9KB | |
| Support_body.stl | 791.3KB | |
| Support_head_v2.stl | 686.8KB | |
| Support_tail.stl | 718.4KB | |
| Tail.stl | 2.0MB | |
| Wheel.stl | 1.8MB |
![Specimens With Gauge Length Five Times The Diameter [E8M] 3D Printer Model](https://cdn.3axis.co/assets/ae/bc/cf/35/aebccf35-03cd-4da1-992f-62420a3495a2/images/75f1d63f-1551-4a64-a171-fb8c6ea0e55e_thumb.jpg)
