on a resin printer its perfect
on a FDM depending on how well your FDM is calibrated you might have to clean the edges and the square hole and peg just a little to get it to slide on and off easily but once you do that your good.
I printed mine at .5 layers with 65% infill
the 2 screws needed are 4mm diameter 35-38mm long
I used self threading wood screws and it worked great
I was going to use heat pressed inserts and decided to keep it simple.
its self storing also, stays with the printer all the time---See picture 2
| S4U-Vat-Drip.stl | 104.9KB |
