Satsana 5015 For Geeetech Mizar Series 3D Printers (Mizar S, Pro, Max) 3D Printer Model
The file 'Satsana 5015 For Geeetech Mizar Series 3D Printers (Mizar S, Pro, Max) 3D Printer Model' is (stl) file type, size is 455.0KB.
The file 'Satsana 5015 For Geeetech Mizar Series 3D Printers (Mizar S, Pro, Max) 3D Printer Model' is (stl) file type, size is 455.0KB.
This is a re-work of my own re-work of the Satsana blower duct and hotend housing for the Mizar S. 1.6 bottom and 1.8 top ARE compatible with one-another; just havent needed to update the duct itself in a while.
Features:
Minimal extra hardware required (2x 20mm M4 bolts + nuts for the blower) - otherwise only requires original screws from stock components.Prints either as 1 whole part, or as 2 main pieces to allow for re-printing and modifying parts without having to re-print the entire thing or for doing the duct and shroud in different materials or colors.Duct (bottom part) can be printed standing-up support-less if you make the top and bottom separately. (I made mine with PETG, bridging was totally fine.)Supports 5015 radial blower fans for high throughputComes with a printable guidepost that snaps onto 2 places to help you align the two halves before adhesionGood clean geometry makes for easy modificationsNote:
You will need to either bend, remove, or re-locate the LED on the bottom of the hotend circuit board for the duct to clear the light. I personally chose to desolder mine and re-locate it on the opposite side for minimal effort which allowed me to bend it a bit further so the duct fits.
| Mizar_S_Satsana_1.6_full.stl | 437.0KB | |
| Satsana_Alignment_Pin_Make_2.stl | 12.4KB | |
| Satsana_MizarS_v1.61_5015_top.stl | 261.8KB | |
| Satsana_MizarS_v1.6_5015_bottom.stl | 175.3KB | |
| Satsana_MizarS_v1.8_5015_top.stl | 313.1KB |
