Sash Clamp Steady (with Magnet) 3D Printer Model
The file 'Sash Clamp Steady (with Magnet) 3D Printer Model' is (stl) file type, size is 221.20 KB.
The file 'Sash Clamp Steady (with Magnet) 3D Printer Model' is (stl) file type, size is 221.20 KB.
There is nothing more annoying when you have lined up a number of sash clamps, only to knock over one or more of them.
So I designed this simple steady to support the clamp to stop this happening. I have added two screw holes just in case you wish to fix them down.
It is designed to take a 10mm diameter magnet, maximum 7mm long.
I have included four stl files with a hole diameters fo the magnet of 10.0, 10.2, 10.4 and 10.6 The hole has a very slight taper (draft) so you may need to experiment with the correct size for your printer. Or print the largest one and glue the magnet in.
| Sash_Clamp_Steady_10.0mm_v18.stl |
| Sash_Clamp_Steady_10.2mm_v18.stl |
| Sash_Clamp_Steady_10.4mm_v18.stl |
| Sash_Clamp_Steady_10.6mm_v18.stl |
