Hello everybody!
I had bought a professional knife set at the last Black Friday sale on Amazon:
https://www.amazon.com/dp/B002ZCKIBM/ref=cm_sw_su_dp
the knive set didn’t come with a block, so I created one.
SAFETY FIRST!
I will speak about safety because this thing will be at home and knives may be dangerous, so I hope you follow the three important steps below:
1) Use magnets as described on the project, you can find them here:
https://www.amazon.it/Magnetastico%C2%AE-neodimio-frigorifero-permanente-interattiva/dp/B00Z7YVU8A
2) Use rubber pads; print them with TPU95 or another rubber filament
3) Create the ballast with the milling machine - the one in my project has a weight of 2.3Kg
You need this hardware:
Phillips flat head self tapping screw 4.8mm x 22mm: 2pcs
Phillips flat head self tapping screw 5.5mm x 25mm: 2pcs
Neodymium magnets 8mm x 3mm: 4 pcs
Check everything else on the PDF and pics.
UPDATE 1 MAY 2018:
Added base without support for those who are lucky to have a bigger print volume
| BASE.stl | 11.9MB | |
| BASE_WITHOUT_SUPPORT.stl | 10.9MB | |
| BODY.stl | 5.3MB | |
| FEET.stl | 4.6MB | |
| HEAD.stl | 8.8MB | |
| PLUG_A.stl | 72.0KB | |
| PLUG_B.stl | 73.1KB | |
| PLUG_C.stl | 74.2KB | |
| RUBBER_PAD.stl | 42.6KB | |
| SAFETY_BALLAST.dxf | 98.4KB | |
| SHIELD.stl | 3.7MB | |
| Shield_no_slots.stp | 346.1KB | |
| Start_Here.pdf | 354.8KB |
