This is a Santa Claus bookmark but can also be used as a stocking decoration at the top of a stocking. I printed it in 4 colors of PETG with a 0.4mm nozzle. The different colors all end at specific heights so you can put in pauses in the Gcode to change the filament.

If you download or collect this model, please “like” it. Thank you.

If you like this, you might also like the Cute Bulldog Bookmark or the Cat Bookmark.

This Santa Claus Bookmark was printed in PETG at 240C and the printbed heated to 75C. This one was done with 4 colors, 6 color layers with every other color being white, and 5 pauses. Of course you can print it all in one color like the cat and bulldog bookmarks, but wouldn't look quite as nice.

The "M600" gcode was inserted on a new line before layers 6, 8, 11, 13 and 16 if you are using 0.2mm layer height. If editing your gcode file by hand, search for text "; layer " and insert "M600" at the above indicated layers. If you are using Simplify3D, you can enter the following code in the "Additional terminal commands for post processing" box on the "Scripts" tab of your Process file.

{STRIP "; postProcessing,"}
{REPLACE "; layer 6," "M600nG92 E0n; layer 6,"}
{REPLACE "; layer 8," "M600nG92 E0n; layer 8,"}
{REPLACE "; layer 11," "M600nG92 E0n; layer 11,"}
{REPLACE "; layer 13," "M600nG92 E0n; layer 13,"}
{REPLACE "; layer 16," "M600nG92 E0n; layer 16,"}

Layer colors

1. 1-5 black
2. 6-7 white
3. 8-10 flesh
4. 11-12 white
5. 13-15 red
6. 16-18 white

Several people have asked me what is Cymatics? You can read about Cymatics on Amazon here.

Don't forget Christmas Tree Ornament Hooks! I like these because they snap on and off.

This is a great ornament container-organizer.

I also like these Xmas tree extension cords with a built-in foot switch. It has two lights by the switch to indicate unplugged, plugged in but turned off and plugged in and turned on.