Santa And Rudolf Automata 3D Printer Model
The file 'Santa And Rudolf Automata 3D Printer Model' is (stl) file type, size is 2.7MB.
The file 'Santa And Rudolf Automata 3D Printer Model' is (stl) file type, size is 2.7MB.
Output all STL files in the correct number.
You should not need supports.
Print [Body_Santa_01 ~ 05] on One Bed. (No Rafts, Supports)
To print Santa in different colors, watch the video below.
https://youtu.be/_vHh7l2R7NI
Assemble all.
Watch the video below.
https://youtu.be/sWFa8ZpHFEo
※ If screwing does not work well, reduce or enlarge female screw and print.
※ When you print small parts, you will need a rafts or brim.
| Body_DeerHead.stl | 744.6KB | |
| Body_Deer_Left.stl | 390.9KB | |
| Body_Deer_Right.stl | 390.7KB | |
| Body_Santa_01_Red.stl | 213.0KB | |
| Body_Santa_02_Silver.stl | 91.7KB | |
| Body_Santa_03_Skin.stl | 60.4KB | |
| Body_Santa_04_Black.stl | 30.2KB | |
| Body_Santa_05_White.stl | 317.3KB | |
| Body_Sleigh_Left.stl | 425.2KB | |
| Body_Sleigh_Right.stl | 423.6KB | |
| Frame_Deer_Base_holder_center_2ea.stl | 39.5KB | |
| Frame_Deer_Base_Left.stl | 285.4KB | |
| Frame_Deer_Base_Right.stl | 285.4KB | |
| Frame_Deer_Hanger_2ea.stl | 69.2KB | |
| Frame_Handle.stl | 76.4KB | |
| Frame_Link_Holder_2ea.stl | 25.9KB | |
| Frame_Santa_Base_2ea.stl | 35.4KB | |
| Frame_Santa_Hanger_2ea.stl | 75.1KB | |
| Gear_center_2ea.stl | 91.1KB | |
| Gear_side_4ea.stl | 84.7KB | |
| MainOperation_Back.stl | 1.0MB | |
| MainOperation_Front.stl | 842.0KB | |
| Screw_CenterGear_Nut_9ea.stl | 440.9KB | |
| Screw_DeeHead_holding.stl | 1.2MB | |
| Screw_Deer_Fix_F_4ea.stl | 439.8KB | |
| Screw_Deer_Fix_M_2ea.stl | 607.3KB | |
| Screw_Santa_holding.stl | 1.5MB | |
| Screw_Santa_PowerLink_F_6ea.stl | 238.1KB | |
| Screw_Santa_PowerLink_M_2ea.stl | 408.9KB |
