Sandmann (Jon Blund) Small Orange Forklift 3D Printer Model
The file 'Sandmann (Jon Blund) Small Orange Forklift 3D Printer Model' is (stl) file type, size is 694.6KB.
The file 'Sandmann (Jon Blund) Small Orange Forklift 3D Printer Model' is (stl) file type, size is 694.6KB.
Plese be aware of Thingiverse failures.
As of writing the thingiverse servers might have NOT put the actual files into the single downloadable zip-file.
A.t.m. this file contains just two old files instead of at least 14 new stl-files and a few pictures.
Give the Sandmann back the small forklifter.
The episode on airfield holding the TV set for watching the kiss good night story.
On video https://www.youtube.com/watch?v=ukywZpxPIGk
This thing makes use of parts used on other of my Sandmann vehicles, of course.
Files:
-the vehicle base frame
-the back portion
-the roof
-the seat
-the wheels
-the lift base singel piece w. frame mount brackets
ot take that
the lift base middle piece & the lift base side with mount brackets
-the lift slider
-the forks
the lift frame
Mini platette I have scaled up a bit
Source https://www.thingiverse.com/thing:5160297
| 10_einfacher_Sitz_single_seat_20mm.stl | 288.1KB | |
| 1_Gabelstapler2_base.stl | 60.7KB | |
| 2_Gabelstapler2_back.stl | 36.5KB | |
| 3_Gabelstapler2_dach.stl | 53.8KB | |
| 4_Gabelstapler2_lift_Kippe_Mitte.stl | 39.5KB | |
| 5_Gabelstapler2_lift_Kippe.stl | 38.9KB | |
| 6_Gabelstapler2_Mitte_Wange_einzeln.stl | 44.5KB | |
| 7_Gabelstapler2_lift_Rahmen.stl | 49.8KB | |
| 8_Gabelstapler2_lift_Kippe_Schlitten.stl | 39.4KB | |
| 9_Gabelstapler2_Gabel_einzeln.stl | 27.2KB | |
| 9_wheel_24x14x3mm.stl | 284.6KB | |
| lenkrad_15mm_V2.stl | 548.3KB | |
| Lenkrad_V4_w_cone_1834_x11mm.stl | 435.9KB | |
| Palette_43x52mm.stl | 21.8KB |
