The case for the USB flash drive board. The board must be glued into the housing.
SLA printing with 0.05 layer.
SanDiskCase_32Gb.stl - the inscription on the case is "32Gb"
SanDiskCase_CruzerBlade.stl - the inscription on the case is "Cruzer Blade"
SanDiskCase_32Gb.f3d - Autodesk Fusion file. You can make any changes to the model.
| SanDiskCase_32Gb.f3d | 668.3KB | |
| SanDiskCase_32Gb.stl | 549.0KB | |
| SanDiskCase_CruzerBlade.stl | 615.2KB |
