Universal sanding stick.
MODEL A, B, C and a very useful extended handle (custom made on my needs).
I have basically improved a lots of different ideas I have seen around.
You will need two M4 nuts inserted into the printed knobs and two M4 rods (11-12 mm) to screw into the body.
You can add tension to the paper by tighten the knobs.
I currently use them in my workshop, I find the very useful, resistant and well designed.
All feedback are appreciated!
Thanks
Fil
| sanding_stick_1.stl | 2.4MB | |
| sanding_stick_A_body_.stl | 596.0KB | |
| sanding_stick_B.stl | 2.5MB | |
| sanding_stick_B_body.stl | 649.8KB | |
| sanding_stick_C.stl | 2.5MB | |
| sanding_stick_C_body.stl | 641.4KB | |
| sanding_stick_extension.stl | 1.7MB | |
| sanding_stick_knob.stl | 596.4KB | |
| sanding_stick_top.stl | 685.5KB |
