Sanding Block (5″ & 6″ Sanding Disks) 3D Printer Model
The file 'Sanding Block (5″ & 6″ Sanding Disks) 3D Printer Model' is (stl) file type, size is 2.2MB.
The file 'Sanding Block (5″ & 6″ Sanding Disks) 3D Printer Model' is (stl) file type, size is 2.2MB.
Inspired by John Heisz,
This uses Orbital sander disks that are 125mm or 150mm (5" or 6") in Diameter.
Items Required:
1 X M5 X 45mm L Fastener
1 X M5 Nut
5 Min Epoxy
!Don't forget to check out my other Cool designs and Follow my weekly KooKoo uploads, Enjoy ;)
| 125mm_sanding_block_BASE.stl | 86.0KB | |
| 125mm_sanding_block_HANDLE.stl | 733.6KB | |
| 125mm_sanding_block_KNOB.stl | 478.4KB | |
| 150mm_sanding_block_BASE.stl | 107.9KB | |
| 150mm_sanding_block_HANDLE.stl | 784.3KB | |
| 150mm_sanding_block_KNOB.stl | 478.8KB | |
| Sanding_block__COMBINED.stl | 1.4MB | |
| Sanding_block__SCHEMATICS.stl | 1.4MB |
