Samurikane Flywheels 3D Printer Model
The file 'Samurikane Flywheels 3D Printer Model' is (stl) file type, size is 1.4MB.
The file 'Samurikane Flywheels 3D Printer Model' is (stl) file type, size is 1.4MB.
I found it hard to tell what the measurements of flywheels were on multiple websites. I decide to cut the middleman and make my own.
The Samurikane flywheels come in 6 different sizes from 33mm in diameter to 38mm. These sizes will correspond to certain Gryphon flywheel cages.
Each has a non-rounded 2mm hole for a motor shaft. This should be pressure fit but use a little bit of loctite to ensure constant reliability.
If anyone has any problems or wants a new size let me know and I'll see what I can do.
| Samurikane_Flywheels_33mm.stl | 667.5KB | |
| Samurikane_Flywheels_34mm.stl | 666.5KB | |
| Samurikane_Flywheels_35mm.stl | 666.4KB | |
| Samurikane_Flywheels_36mm.stl | 667.3KB | |
| Samurikane_Flywheels_37mm.stl | 667.3KB | |
| Samurikane_Flywheels_38mm.stl | 667.6KB |
![[DISCONTINUED] TF2 Rescue Ranger Cosmetic Attachment For Nerf RoughCut 3D Printer Model](https://cdn.3axis.co/assets/50/52/a7/aa/5052a7aa-a4f8-419d-af55-a8d9732aff78/images/274f39be-187a-4ea8-8c5e-0802cac36031_thumb.jpg)