This is my Samurai helmet I put together Printed on My Flashforge Adventurer m5 Pro
Parts cut to Fit a 250 x250 build plate
The first ring is the most difficult to attach I applied glue and clamped the ring to the helmet.
Make sure you center it well on the helmet.
Then I plastic welded the ring inside of the helmet as well this might be overkill.
Also, I drilled out the top holes on the ring and through the helmet, I tried to add the holes to the helmet but could never get the alignment right.
The other rings are sewn in place with gold string.
The curls I attached by plastic welding to the first ring you could probably use epoxy for this I found melting the plastic together with a soldering iron works great for me.
| curl1.stl | 1.8MB | |
| curl2.stl | 1.8MB | |
| emblem3.stl | 439.9KB | |
| Helmet.stl | 6.4MB | |
| horns.stl | 2.4MB | |
| hornsedit_.stl | 1.7MB | |
| mask.stl | 4.8MB | |
| ring-1.stl | 11.3MB | |
| ring-2.stl | 11.3MB | |
| ring-3.stl | 11.3MB | |
| ring-4.stl | 11.3MB | |
| ring-5.stl | 11.3MB | |
| Rings-split-1.stl | 22.0MB | |
| Rings-split-2.stl | 34.4MB |
