The SAMLAIR Box is a handy chamber for airbrushing built from an IKEA Samla Box and other IKEA components.

It utilizes two 120mm PC FANs to create an airflow and suck paint particles away from you and into a filter.

Optionally it includes freely positoned lighting, tool storage and a turn table for convenience.

To construct one you will need:

1x 22litre IKEA Samla Box (39x28x28)
2x Plywood (4mm) A4
2x PC FAN 120mm (12V)
4x M4 Screw 40mm
8x M4 Hexnut + Washers
~250x150mm Steel Mesh (should be magnetic, check before you buy)
Strips of Filter Material (I used material from a vacuumer)
~8 Neodymium Magnets (strong enough to keep the filter material in place)

Optional (Turntable)

1x IKEA "Oleby"
1x 8mm Inner diameter ball bearing
4+ Felt Gliders

Optional (Light)

LED-Berg Light Dots
24V Power Supply (the one that comes with LED BERG is not Powerful enough)
Linear Regulator 24V->12V (so you can use the FANs and the light with the same power supply)
4x 30mm washer
4x Neodymium Magnet Disc (strong enought to hold a Washer through the box wall. I used 20mm diameter, 2mm thickness)
IKEA Trassla Cable Organizers

Optional (Storage)

1x Ikea Samla Lid (for 22l)
4x Ikea Samla Closing Latch
1x Ikea Samla Tool Insert

Construction instructions are also found here:

https://www.hackerspace-ffm.de/wiki/index.php?title=SAMLAIR_Airbrush_Chamber