Salifert Titrator (Alkalinity/Calcium/Magnesium Reef Aquarium Test Kits) 3D Printer Model
The file 'Salifert Titrator (Alkalinity/Calcium/Magnesium Reef Aquarium Test Kits) 3D Printer Model' is (STL) file type, size is 342.7KB.
The file 'Salifert Titrator (Alkalinity/Calcium/Magnesium Reef Aquarium Test Kits) 3D Printer Model' is (STL) file type, size is 342.7KB.
Inspired by Red Sea Reef Test Kits that include a titrator.
Now you can use your Salifert test kits in a single-hand operation too!
It works for all three Salifert Alkalinity Calcium Magnesium tests.
How To Use:
Follow the directions for your test kit, which typically start with drawing water from the aquarium, and putting it into the vial.
Add drops to vial per instructions.
Snap vial into lower half of titrator.
Draw solution into syringe to specified line, then place syringe through both holes on titrator.
Use thumb to add 1 drop at a time, and gently swirl until color change!
| Salifert_Titrator.STL | 919.4KB |
