Saddle Tab Adapter 3D Printer Model Free Download

3D Printer Models

Saddle Tab Adapter 3D Printer Model

Author: @aiber

License: CC BY

File formats: SLDASM,SLDPRT,STL

Download type: zip

Size:11.5MB

The file 'Saddle Tab Adapter 3D Printer Model' is (SLDASM,SLDPRT,STL) file type, size is 11.5MB.

Description Files (7)

Summary

An adapter for adding tabs to non-tabbed saddles - to enable the use of more traditional saddle bags.

These tabs are present on many leather saddles by default.

There are two versions of the mount: a 3D printed version & a Machined version. The 3D printed version has more material to cope with its weaknesses - I would only put very light, small bags on it.

Hardware required:

2 M5 x 25 mm bolts: longer depending on your saddle rail diameter, which is probably standard
2 M5 locknuts, 5.2 mm width, 8 mm height

Thanks to Timo Wories over at GrabCAD for the wonderful saddle model (https://grabcad.com/library/vnt-saddle-1).

Also inspired by the Hobo Restuvus mount (http://www.hobopieces.com/product/the-restuvus). Pictures of that one are included above for reference.

The slot width, diameter, & spacing were referenced from a Velo Orange leather saddle I have.

Assembly.SLDASM	2.3MB
Bar.SLDPRT	114.5KB
Bar.STL	33.9KB
Mount.SLDPRT	305.4KB
Mount.STL	108.1KB
Mount_REFERENCE.SLDPRT	1.1MB
VNT_Saddle.SLDPRT	7.8MB

Saddle Tab Adapter 3D Printer Model

Summary

You might also like