S2000 Front License Plate Mount 3D Printer Model Free Download

3D Printer Models

S2000 Front License Plate Mount 3D Printer Model

Author: @frogdotbin

License: CC BY-SA

File formats: stl

Download type: zip

Size:5.2KB

The file 'S2000 Front License Plate Mount 3D Printer Model' is (stl) file type, size is 5.2KB.

Description Files (2)

Summary

Installs on OEM front bumper of AP2 S2000 (2004 and newer). I'm not sure of the fitment for AP1. Model has 20 degrees of backward tilt for cool factor :) It probably also helps with wind deflection.

Choose either the half plate or the full plate. Half plate mount probably supports license plate enough, but it still might bend over time due to debris hitting it or wind damage. If the model scaling is weird, the width should be 220mm on both. Recommend using supports on the larger overhangs.

Additional parts needed to install:

3M VHB tape applied to top edge
3x M6 25mm screws
3x M6 nylon locking nuts (or regular nut + thread lock)
3x M6 washers
(optionally) 2x M6 extra screws, nuts, and washers if using the full backing plate

Install steps:

Attach 3M VHB tape to the top where it will contact the bumper (leave protective film on for now)
Use a screw to attach to the existing hole in the plastic grill. I used washers whenever a screw was contacting the PLA print (so it didn't crush as easily)
Remove red film on VHB tape and stick it to bumper
Install license plate

s2k_front_plate_mount_6cut.stl	7.9KB
s2k_front_plate_mount_7cut.stl	11.6KB

S2000 Front License Plate Mount 3D Printer Model

Summary

Tags

You might also like