Rzeppa Joint (Constant Velocity) Mechanism 3D Printer Model
The file 'Rzeppa Joint (Constant Velocity) Mechanism 3D Printer Model' is (stl) file type, size is 4.5MB.
The file 'Rzeppa Joint (Constant Velocity) Mechanism 3D Printer Model' is (stl) file type, size is 4.5MB.
Rzeppa Joint is a type of mechanical coupling to transmit rotational motion through a variable angle. Unlike a Universal Joint, the input and output speeds are the same. This mechanism is typically found in automobile applications.
Print the parts and assemble them as shown in the pictures.
1 of each part, and 6 balls are needed.
3 pieces of 1.75mm filament are used to lock the shafts in place.
A specially designed retaining ring is used to connect the input shaft.
Also uploaded are the outer and inner races, without the shaft. These parts are uploaded just for reference.
If you would like to leave a tip, please check out my Ko-fi page! Really appreciate your support! https://ko-fi.com/plusalphadesigns
| Ball_v2.stl | 1.4MB | |
| Base_InnerShaft_v8.stl | 115.0KB | |
| Base_OuterShaft_v7.stl | 120.6KB | |
| Cage_v2.stl | 614.7KB | |
| Handle_InnerShaft_v4.stl | 690.3KB | |
| Handle_OuterShaft_v4.stl | 698.6KB | |
| InnerRace_v4.stl | 2.2MB | |
| InnerRace_wShaft_v3.stl | 2.2MB | |
| OuterRace_v4.stl | 2.5MB | |
| OuterRace_wShaft_v7.stl | 3.1MB | |
| RetainingRing_v1.stl | 95.4KB | |
| Shaft_InnerRace_v19.stl | 192.7KB | |
| Shaft_OuterRace_v9.stl | 109.7KB |
![Specimens With Gauge Length Five Times The Diameter [E8M] 3D Printer Model](https://cdn.3axis.co/assets/ae/bc/cf/35/aebccf35-03cd-4da1-992f-62420a3495a2/images/75f1d63f-1551-4a64-a171-fb8c6ea0e55e_thumb.jpg)
