Ryobi Wet/Dry Vacuum Cord Holder 3D Printer Model
The file 'Ryobi Wet/Dry Vacuum Cord Holder 3D Printer Model' is (stl,step) file type, size is 68.0KB.
The file 'Ryobi Wet/Dry Vacuum Cord Holder 3D Printer Model' is (stl,step) file type, size is 68.0KB.
Hose adaptor that will hold your power tool cable to the vacuum hose. This helps keep the tool cord from getting tangled/pulled out, caught and at the end of the hose where your tool is.
Originally made for the Ryobi 30L vacuum that supports power tools being supplied from the vacuum head.
Has 3 cord sizes on each clip. 12x clips can be printed on a 250mm bed at a time. One batch should be sufficient for the standard Ryobi 30L hose.
Have included the STEP file for those who want to tailor it to suit other vacuums.
Print laying on large flat side no support. I would recommend a brim but not essential. No brim and a couple in a batch of 12 lifted at the cord clip edges a little.
Tip for the Ryobi 30L users - turn your motor 180 degrees on the drum so the outlet lines up with the vacuum hose.
Enjoy.
| Ryobi_Vacuum_Cord_Holder.stl | 153.4KB | |
| Ryobi_Vacuum_Hose_Cord_Holder.step | 97.9KB |
