These mounts let me use my existing chargers, and save $100 by not buying the multi-battery charger. The front and back sides are different, you need one of each mount per charger. They are straight forward and easy to print. I made a four unit charger but you could make any number you want or you could use these to mount a charger on the wall. I cut and spliced the wires to clean things up, but you could use a power strip instead. The switch is just to turn the whole thing on or off. The screws are #6 x 3/4". The board is 8 3/4" x 22 5/16".
| Ryobi_charger_foot_459.stl | 51.3KB | |
| Ryobi_charger_foot_506.stl | 74.3KB |
