Display your running/marathon medals. Each hanger has a set of cut outs on the back to allow fastening them together to make interesting shapes to display your colorful medals. (You will have to buy some 2" mending plates for multiple medals)
To load medal;
Push ribbon through the top single slot from the front, then back through the middle slot and back again through the lower slot.
Then turn the ribbon and got back to the front through a side slot, across the front of the hanger, through the other side slot and continue until all ribbon is used up. You will have a short tail of ribbon at the back, but not enough to interfere with hanging. Use the 3 slots to tighten up the medal so it is as close to the top single slot as possible.
| Medal_Hanger.stl | 253.2KB |
![Macrotrack Oval Speedway Miniature [SAMPLE PACK] 3D Printer Model](https://cdn.3axis.co/assets/2b/6e/33/66/2b6e3366-4366-495c-9031-1eb3ba3a8e8c/images/9923d3d4-ab4a-4005-b273-a3f7491bec84_thumb.jpg)
