This is a little adapter I drew up based on my previous runcam owl adapter. I'm transferring that build over to the SpaceoneFPV 220X frame with Aero pod designed by @babar121 and my original design doesnt seem to fit. I fugured it would make a clean mounting spot for the OSD as well. It was designed for the standard camera mounting version of the pod, not the short camera one.

I printed the one in the pictures in TPU but ABS or other stiffer plastic ought to be alright as well. It accepts two m3 3.8mm depth heat-set thermoplactic threaded inserts. These help it to screw in securely, and wont wear out over repeated installation and removal of the camera. Theyre available here at McMaster-Carr as part number 94180A331, although only in bags of 100 minimum... They do come in handy frequently if you do much printing however. You will also need some small m3 button head screws, around 4mm seems perfect.

They install with a soldering iron. mcmaster sells a special one and special tool for installing, but for home use a standard iron and a pair of pliers is enough. rest iron firmly onto the insert but apply most of the force required to push it in using the pliers. broken a soldering iron heater element before trying to use only the iron to put it in. YMMV.

The micro minimosd fits neatly on the back, and the connector for the owl camera should fit cleanly through the hole as well. It seems to test fit well in my copy of the babar121's pod, but I havent flow it yet. I plan to use a little transfer tape to hold the camera into the mount, and either more tape or some hot glue to hold the minimosd into its mounting location.

I've provided the .sldprt file, feel free to modify however you like, post remixes, etc.