Hey guys and gals, Synbios here again.
After the success of my last robot, I've decided to try something a little more intricate, and so, after about a month of tinkering and restarting, I bring to you my take on G1's classic little scrapper of a Decepticon, Rumble ( Or Frenzy, depending on how you choose to paint him )
I've included 2 heads, one will show a little more detail on a smaller print, although, for full detail I'd recommend printing it at 120% scale using a 0.4 nozzle. 100%, however will give you a figure about the same size as the original toy.
Designed on good old Fusion 360, with a total print time of around 2 hours for the main bot, and around 4.5 hours for the piledrivers.
| 01_Main_Body_Back_Panel.stl | 148.8KB | |
| 02_Main_bpdy_Front_Panel.stl | 145.2KB | |
| 03a_Face_v2.stl | 157.8KB | |
| 03_Head.stl | 78.8KB | |
| 04_Shoulder.stl | 414.4KB | |
| 06_Hip.stl | 76.5KB | |
| 06_Shoulder.stl | 414.4KB | |
| 07_Hip_2.stl | 72.5KB | |
| 08_Right_Upper_Arm.stl | 73.5KB | |
| 09_Left_Upper_Arm.stl | 73.5KB | |
| 10_Right_Lower_Arm.stl | 53.7KB | |
| 11_Left_Lower_Arm.stl | 53.7KB | |
| 12_Arm_hinge_left.stl | 83.1KB | |
| 13_Arm_hinge_right.stl | 83.1KB | |
| 14_Left_Pelvis.stl | 57.7KB | |
| 15_Right_Pelvis.stl | 57.7KB | |
| 16_Left_Leg.stl | 80.4KB | |
| 17_Right_Leg.stl | 80.4KB | |
| 18_left_Foot.stl | 31.6KB | |
| 19_Right_Foot.stl | 31.6KB | |
| 20_Left_Leg_Pin.stl | 27.6KB | |
| 21_Right_Leg_Pin.stl | 27.6KB | |
| 22_LeftFoot_Pin.stl | 28.0KB | |
| 23_Righ_Foot_Pin.stl | 28.0KB | |
| 24_Arm_joint_pin_1.stl | 28.0KB | |
| 25_Arm_Joint_Pin_2.stl | 28.0KB | |
| 26_Arm_Join_Pin_3.stl | 28.0KB | |
| 27_Arm_Joint_Pin_4.stl | 28.0KB | |
| 30_Left_Hand.stl | 15.3KB | |
| 31_Right_Hand.stl | 15.3KB | |
| 32_Left_Booster_Cannon.stl | 437.4KB | |
| 33_Right_Booster_Cannon.stl | 441.2KB | |
| 34_Left_Piledriver.stl | 186.8KB | |
| 35_Right_Piledriver.stl | 186.8KB | |
| better_detail_head.stl | 157.8KB |
