RUIXI Soft Flame Lighter Case / Cover 3D Printer Model
The file 'RUIXI Soft Flame Lighter Case / Cover 3D Printer Model' is (stl) file type, size is 93.6KB.
The file 'RUIXI Soft Flame Lighter Case / Cover 3D Printer Model' is (stl) file type, size is 93.6KB.
This is a case for a soft flame pipe lighter sold by RUIXI:
https://www.amazon.com/gp/product/B07H2V7YSY/
I have found that sometimes the fill valve on this lighter leaks after filling, and I have to repeatedly give it another shot of butane to wiggle the seal into place until I can no longer hear any gas leaking out.
I thought it would be helpful to have a cover for the lighter to keep lint and dirt out of the fill valve, so here it is. I have also included a mockup of the lighter itself so you can make your own case if you don't like mine.
Lighter case (open face):
I printed this in TPU with no supports (flat on its side) and with default settings for my filament. 10% infill.
Bottom case: (regular or tall)
If you choose to print the small sleeve version (either the short or tall) you may want to size it to 98% or so to make it fit snugly without slipping off. It will need supports.
If you'd like to play with this in TinkerCAD, here it is:
https://www.tinkercad.com/things/9ybKVievEKq-ruixi-it-lighter
If you come up with something cooler, please share!
| Ruixi_IT_lighter.stl | 187.0KB | |
| Ruixi_IT_lighter_case.stl | 97.2KB | |
| Ruixi_IT_lighter_case_bottom.stl | 37.2KB | |
| Ruixi_IT_lighter_case_bottom_tall.stl | 37.0KB |
