Description Files

Summary

Hello fellow printers!

This set of ruins is designed to be assembled in the most easy but still most versatile way. Just print a few wall sections and several copies of the pillars and the rubble. Then glue the parts together with pillars at the corners. With the rubble parts as footings you don't even need to create a base for your walls.

Printing

This print is designed for resin printing but don't hesitate to try it with your FDM printer and post the results!
The full set you see on the pictures took me about 600ml of resin.
Since I could not manage to get the parts perfectly plane on the underside you should lower the STL file about 0.2mm below the print plate
No supports or rafts should be needed when these parts are printed upright in resin.

Tips for the building process

Use sandpaper to flatten some parts if necessary.
Cut some single bricks from Styrofoam to add them to your bases and cover any flaws.
Mirror your parts for more variety!
put together two rubble parts to create a whole standalone pile
consider putting some parts together beforehand in you slicer

Balustrade_long_1.stl

Balustrade_long_2.stl

Balustrade_long_3.stl

Balustrade_short_1.stl

Balustrade_short_2.stl

Balustrade_short_3.stl

Buttress_1.stl

Buttress_2.stl

Buttress_3.stl

Door.stl

Fountain_fish_head.stl

Fountain_lion_head.stl

Gate.stl

Pillar_1.stl

Pillar_2.stl

Pillar_top_1.stl

Pillar_Top_2.stl

Pillar_Top_3.stl

Rubble_1.stl

Rubble_2.stl

Rubble_3.stl

wall_1.stl

Wall_10.stl

Wall_2.stl

Wall_3.stl

Wall_4.stl

Wall_5.stl

Wall_6.stl

Wall_7.stl

Wall_8.stl

Wall_9.stl

Wall_Basin_1.stl

Wall_Basin_2.stl

Wall_Basin_Podest_1.stl

Wall_Fountain_1.stl

Wall_Fountain_2.stl

Ruins Of Mammutal 3D Printer Model

Summary

Hello fellow printers!

Printing

Tips for the building process

Tags

You might also like