Rugged Storage Box V2 3D Printer Model
The file 'Rugged Storage Box V2 3D Printer Model' is (stl) file type, size is 2.0MB.
The file 'Rugged Storage Box V2 3D Printer Model' is (stl) file type, size is 2.0MB.
Here's an even tougher version of my previous design:
https://www.thingiverse.com/thing:3071272
I've strengthened the clips and added guards to protect the clips if you drop it. I also added a lanyard loop.
This prints without supports, each half flat on the bed, as shown in the image. The clips extend from the base at an angle of 65 degrees, which should be fine for most printers.Make sure you have good bed adhesion.
This works great in both PLA and PETG. (This is the first thing I printed with PETG, a tip for anyone who hasn't used it before: If your cooling fan is set too high, you won't get good layer adhesion, it took me a few tries to figure that out.)
I can now change the proportions quite easily. If you think I should make one in a particular shape/size to suit a certain item, let me know.
| Bottom.stl | 2.4MB | |
| Top.stl | 3.2MB |
