The file 'Rugged “frog Box V2.0” 75mm Whoop Drone + Batteries, Charger & AC Adapter Case 3D Printer Model' is (3mf,f3d,mtl,obj,stl) file type, size is 16.1MB.
You will need a printer that can print 220mm in any direction in order to print the parts in one piece. Also this is the first thing I ever designed and couldn't figure out how to remove the holes (as seen in the pictures), you will need a small allen key to remove the printing supports, which you will also need to use.
"The latches and hinges are held in place with 20mm M3 screws. You need 8 screws in total."
I´ve also included a version that can fit the vifly whoopstor v3
Got inspired to design this after seeing AN_R_KEY's 75mm Whoop Travel Case
Anyway not my best work but hope it is useful to you
| Frog_Box_v2_CH26_v3.3mf | 1.2MB | |
| Frog_Box_v2_CH26_v3.f3d | 4.0MB | |
| Frog_Box_v2_CH26_v3.mtl | 104.0B | |
| Frog_Box_v2_CH26_v3.obj | 10.5MB | |
| Frog_Box_v2_CH26_v3.stl | 4.1MB | |
| Frog_Box_v2_CH26_ViFlyWhoopstar3_v1.3mf | 1.2MB | |
| Frog_Box_v2_CH26_ViFlyWhoopstar3_v1.f3d | 4.1MB | |
| Frog_Box_v2_CH26_ViFlyWhoopstar3_v1.stl | 4.1MB | |
| hinge.stl | 516.2KB | |
| hinge_looser.stl | 805.5KB | |
| hinge_single_axis.stl | 766.5KB | |
| latch_arm_v2.stl | 743.0KB | |
| latch_cam_v2.stl | 130.7KB |
