A great model for holding the game Quiddler. Similar to the Uno case, 1.75mm filament is all you need to secure the lid to the base, and the latch to the lid.
I have remixed all models in this - apart from the Quiddler logo lid, there is also an extended latch (also posted here) and a taller case which can handle two decks of cards (also posted here).
If you want to print the logo itself in another color (and can only print one color at a time, like me), in your slicer of choice, simply position the logo model in the cavity of the case's logo, and print the logo by itself. Then keep your bed heated, swap your filament, and print the lid itself. The logo is short enough (.4mm) that it can (see: should) be left in place when the lid is actually printed.
| Extended_Latch.stl | 16.3KB | |
| Quiddler_Lid.stl | 862.3KB | |
| Quiddler_Lid_-_Logo.stl | 709.5KB | |
| Rugged_Box_-_Taller_Base.stl | 116.1KB |
