Rugged parametric BOX

Based on: https://www.thingiverse.com/thing:5217074 (thank you! your design is 🔥)

I was interested by the original design and was trying to figure out if I could make cards fit also with the sleeves on. So I thought why can't I make this parametric?! and that's it.
Basically I remodelled the design in Fusion 360 and make it parametric.

Instructions

In Fusion 360, go to DESIGN > SOLID > MODIFY > Change Parameters and change the default values with the one you need (be aware: there are minimum values indicated).
Export the STL file and import it in your favourite slicer.

What's included

I include default STL files (same size as the original) and the two Fusion 360 projects where you can change your own dimensions.

I made this with the possibility to make different text on top (like for example the UNO Flip! version), just edit the original files or ask me to make a specific version (I make my best, no guarantees 😁)

Dimensions

The lid has a fixed inner height of 9mm
The box has a minimum inner height of 9mm, a minimum width (the hinges side) of 92mm and a minimum depth of 63mm

PS: I am planning of making the minimum values a little bit smaller but not in the near future or at least I expect first to see a little bit of interest in doing this

Assemble

As the original, you can use 1.75mm filament for the hinges pins (or anything similar like a straightened paper-clip, a nail, etc.)

Note

I am NOT a 3D designer by any mean, I make my best and for sure there were easier/better ways to make this, go easy on me 😁

Available boxes

• Default box (inner dimensions: 94 x 65 x 35 mm)
• Exploding Kittens: 2 Players Edition
• Phase10 (with both old and new logo)

In progress boxes

• None