Hello fellow nonflat print fans.
I needed a shelf for my Rubix cube.
So i made this monster, skeleton claw shelf.
It is made in two color, to print in one go, on my Ultimaker 3.
But i also made the nails alone. if you need to print the hand alone and then print the nails.
You "should" be able to print it in two go, and glue it together.
It fit my GAN 356 cube, with some room to spare.
The GAN 356 cube is 56x56x56 mm.
I printed mine in ABS with 20% infill, nails 100% infill.
I had no problem with warping.
| RUBIX_CLAW.stl | 28.1MB | |
| RUBIX_NAILS.stl | 804.4KB | |
| RUBIX_NAILS_ALONE.stl | 804.3KB |
