Rubik`s Dice Cube V2 3D Printer Model Free Download

Description Files (6)

Summary

This is a famous engineer Rubik puzzle cube. I'm designed this model myself in FreeCAD. As opposed to previous version with tolerance 0.2 mm this cube has a zero tolerance between parts.

It has a next parts:
1 core
6 center "cubes"
8 corner "cubes"
12 edge "cubes"
6 pins for connect center parts to core
189 small dots in different colour.

There are some zip-files for your convenience - it has a whole plate of parts with supports (not made by slicer). Before assembling the cube, you need to remove the supports with a knife.

Instruction of assembly:

Insert small dots into holes in each cube with glue (Dichloromethane for example).
Connect each pin into center "cube" with a click sound. See that a hole in center cube has a groove and a pin has a skirt.
Insert a central cube with number 6 into the core with a click sound.
Put this part on a table and assembly all of cubes (4 edges and 4 corners) with number 6.
Insert another 4 central cubes (number 2, 3, 4, 5) into the core. Note, that sum of dice number on opposite sides is 7 (1:6, 2:5, 3:4).
Put 4 edge cubes at a middle plane in according order.
Put 4 edge and 4 corner cubes with number 1.
Insert a central cube with number 1 into the core with a click sound.

For the best result, it is necessary to lubricate the internal rubbing parts with Teflon grease.

You can also apply acrylic paint to the inner points using a medical syringe.

Dice_New_-_Centers_6_pcs.stl	774.6KB
Dice_New_-_Core.stl	765.4KB
Dice_New_-_Corners_8_pcs.stl	21.6MB
Dice_New_-_Dots_196_pcs.stl	3.0MB
Dice_New_-_Edges_12_pcs.stl	39.3MB
Dice_New_-_Pins_6_pcs.stl	82.1KB

Rubik`s Dice Cube V2 3D Printer Model

Summary

Tags

You might also like